TCP vs UDP: Detailed Comparison 2024

Rashmi Bhardwaj | Blog,Protocol
Advertisements

Introduction to TCP & UDP

TCP and UDP both are used for transferring data or packets on the internet or Intranet. Both perform the same job but the way is different. In this blog, we are discussing the difference between TCP and UDP i.e. TCP vs UDP.

TCP VS UDP

TCP stands for “Transmission Control Protocol”. UDP stands for “User Datagram Protocol”. The main difference between UDP vs TCP is that the TCP is connection-oriented while UDP is connectionless.

In TCP after the connection is set up, bidirectional sending of data is possible but in UDP, packets are sent in chunks. TCP is more reliable than UDP but UDP is faster than TCP.

Advertisements

Header size of TCP is 20 bytes while Header size of UDP is 8 bytes. UDP doesn’t have error checking mechanism that is why it is less reliable but is faster in data transferring while TCP is reliable but comparatively slow as it keeps the data smooth and checks error.

Related- Common TCP

TCP vs UDP: Key points of difference

  • TCP stands for “Transmission Control Protocol” while UDP stands for “User datagram Protocol”.
  • TCP is the connection-oriented protocol while UDP is connectionless protocol.
  • TCP is more reliable than UDP.
  • TCP uses both error detection and error recovery. UDP works on a “best-effort” basis
  • UDP is faster for data sending than TCP.
  • UDP makes error checking but no reporting but TCP makes checks for errors and reporting.
  • TCP gives a guarantee that the order of data at receiving end is the same as on sending end while UDP has no such guarantee.
  • Header size of TCP is 20 bytes while that of UDP is 8 bytes.
  • TCP is heavyweight as it needs three packets to set up a connection while UDP is lightweight.
  • TCP has acknowledgement segments but UDP has no acknowledgement.
  • TCP is used for an application that requires high reliability but less time-critical whereas UDP is used for an application that is time-sensitive but requires less reliability.

Comparison table: TCP vs UDP

A More detail comparison between TCP vs UDP is shared below –

PARAMETERTCPUDP
Full Form
Transmission Control ProtocolUser Datagram Protocol or Universal Datagram Protocol
ConnectionTCP is a connection-oriented protocol.UDP is a connectionless protocol.
Half-Closed connectionTCP allows half closed connectionsNot applicable for UDP protocol
FunctionAs a message makes its way across the internet from one computer to another. This is connection based.UDP is also a protocol used in message transport or transfer. This is not connection based which means that one program can send a load of packets to another and that would be the end of the relationship.
UsageTCP is suited for applications that require high reliability, and transmission time is relatively less critical.UDP is suitable for applications that need fast, efficient transmission, such as games. UDP's stateless nature is also useful for servers that answer small queries from huge numbers of clients.
Use by other protocolsHTTP, HTTPs, FTP, SMTP, Telnet,SSHDNS, DHCP, TFTP, SNMP, RIP, VOIP,IPTV
Multiplexing & DemultiplexingUsing TCP port numberUsing UDP port numbers
Ordering of data packetsTCP rearranges data packets in the order specified.UDP has no inherent order as all packets are independent of each other. If ordering is required, it has to be managed by the application layer.
Speed of transfer
The speed for TCP is slower than UDP.
UDP is faster because error recovery is not attempted. It is a "best effort" protocol.
Reliability
There is absolute guarantee that the data transferred remains intact and arrives in the same order in which it was sent.There is no guarantee that the messages or packets sent would reach at all.
Header SizeTCP header size is 20 bytesUDP Header size is 8 bytes.
Common Header FieldsSource port, Destination port, Check SumSource port, Destination port, Check Sum
Streaming of dataData is read as a byte stream, no distinguishing indications are transmitted to signal message (segment) boundaries.Packets are sent individually and are checked for integrity only if they arrive. Packets have definite boundaries which are honoured upon receipt, meaning a read operation at the receiver socket will yield an entire message as it was originally sent.
WeightTCP is heavy-weight. TCP requires three packets to set up a socket connection, before any user data can be sent. TCP handles reliability and congestion control.UDP is lightweight. There is no ordering of messages, no tracking connections, etc. It is a small transport layer designed on top of IP.
Data Flow ControlTCP does Flow Control. TCP requires three packets to set up a socket connection, before any user data can be sent. TCP handles reliability and congestion control.UDP does not have an option for flow control
Error CheckingTCP does error checking and error recovery. Erroneous packets are retransmitted from the source to the destination.UDP does error checking but simply discards erroneous packets. Error recovery is not attempted.
Fields1. Sequence Number
2. AcK number
3. Data offset
4. Reserved
5. Control bit
6. Window
7. Urgent Pointer
8. Options
9. Padding
10.Check Sum
11. Source port
12. Destination port
1. Length
2. Source port
3. Destination port
4. Check Sum
AcknowledgementAcknowledgement segmentsNo Acknowledgment
HandshakeSYN, SYN-ACK, ACKNo handshake (connectionless protocol)

Download the comparison table here.

tcp vs udp

Continue Reading:

TCP FLAGS : All you want to know

What is TCP FIN PACKET?

ABOUT THE AUTHOR

Advertisements

Leave a Comment

Your email address will not be published. Required fields are marked *

Shopping Cart
Select your currency
USD United States (US) dollar
Scroll to Top