At times in a switching environment, unknown unicast or multicast traffic on LAN is flooded to switch ports because of one of 2 common conditions (1) a MAC address has timed out or (2) has not been learned by the switch. This condition of flooding packets with unknown destination MAC address to all the switch ports can have some security issues or even undesirable when we have isolated port (under Private VLAN). Another scenario where only multicast traffic is desired on the port while unicast traffic is not required – Let’s say there are telepresence devices connected on the port which require multicast traffic only and no laptop may be connected to use this as data port.

Considering above requirements, “Unicast” and “Multicast” traffic flooding can be stopped from some designated ports.

The syntax the configuration is given below –

Switch(config-if)# switchport block unicastSwitch(config-if)# switchport block multicast

The above configuration may be verified with below configuration syntax –

Switch# show interface <interface-id> switchport

Note – The flood blocking feature is supported on all switched ports (including PVLAN ports) and is applied

to all VLANs on which the port is forwarding.

Related Posts

About The Author

Add Comment

Social Media Auto Publish Powered By : XYZScripts.com
Select your currency
INR Indian rupee